Contact
Country websites

Attention

The medical device and therapy related information on this website is aimed exclusively at healthcare professionals.

The product related information on the websites covers – unless explicitly stated otherwise – only CE marked products which are marketable in the European Union. Please be aware that not all products and services described on the following website are cleared or available for sale in all countries. Please check the relevant country web site for details.

By clicking the button “Accepted and Confirmed” you assure that you have taken note of this information.

Back to Homepage Accepted and Confirmed

Dialysis water supply

Comprehensive water treatment systems for dialysis units

Comprehensive water treatment systems for dialysis units

  • Comprehensive range of reverse osmosis systems
  • Individualized water treatment systems
  • High standard of water purification for dialysis
  • AquaA, AquaBplus, AquaC

DISCLAIMER

Not all products and services are cleared or available for sale in all EU countries and worldwide. Check your country web site for details. 

Dialysis water supply at a glance

In order to ensure the required quality of fluids, our product range includes a variety of systems for different purification stages, such as reverse osmosis systems. The right system can be assembled based on personal preferences and local requirements.

AquaA Product Group

Our innovation meets your evolving needs

AquaA

AquaA

AquaA is the advanced system for permeate preparation in dialysis center and provides a permeate capacity up to 4,000 l/h.

Advantages of the AquaA:

  • Integrated sample ports for quality assurance procedures
  • Integrated control system before and during dialysis operation
  • Energy and water saving operation
  • Remote control
  • Emergency operation
  • Prepared for integration into dialysis and hospital IT management systems
AquaA2

AquaA2

AquaA2 is an additional (2nd stage) reverse osmosis module for the AquaA designed to meet higher permeate quality of a modern dialysis center.

Advantages of the AquaA2:

  • Full redundancy
  • Higher permeate quality
  • In case of emergency can be operated as a stand-alone unit
AquaHT

AquaHT

AquaHT is a hot water disinfection module designed to be integrated into the AquaA product group. It enables the heat disinfection of the both modules AquaA and AquaA2.

Advantages of the AquaHT:

  • Integrated heat disinfection of up to 40 HD machines in parallel
  • Heat disinfection is performed automatically and is documented by the system as specified by ISO 26722:2009
  • AquaHT permits continuous disinfection: a thermal disinfection of the permeate ring can be followed by a subsequent disinfection of the RO membranes
AquaUF

AquaUF

AquaUF is an ultrafiltration module for higher permeate quality.

Advantages of the AquaUF:

  • Increased permeate quality
  • Removal of micro-organisms, bacteria and viruses
  • Heat disinfection of ultrafiltration module
  • Bypass possibility
  • High chemical resistance, double-layered

AquaBplus Product Group

The right fit for your budget

AquaBplus

AquaBplus

AquaBplus is a basic module for permeate preparation in the dialysis center.

Advantages of the AquaBplus:

  • Sensors and hydraulic systems are controlled by integrated functional test routines
  • User-friendly interface
  • Upgradable by a range of options
  • Network connectivity
AquaA2

AquaBplus B2

AquaBplus B2 is the second stage of AquaBplus product group. It is designed to meet the needs and quality standards of a modern dialysis center.

Advantages of the AquaBplus B2:

  • Both stages can be operated together or individually (for redundancy or higher permeate quality)
AquaBplus HF

AquaBplus HF

AquaBplus HF allows hot disinfection of the permeate loop, dialysis unit tubing and the dialysis units itself.

Advantages of the AquaBplus HF:

  • Sequential disinfection of up to five HD machines
  • Can be retrofitted
  • Reduction of biofilm formation by permeate ring and connected user points without additional chemical disinfection
  • Continuous monitoring of temperature

AquaC Product Group

When independence matters

AquaC UNO H

AquaC UNO H

AquaC UNO H provides a thermal disinfectable single patient RO.

Advantages of the AquaC UNO H:

  • Significant risk reduction by using hot water instead chemicals for disinfection
  • Heat disinfection of the membrane and the ring
  • Interface heat disinfection in combination with FME HD device 5008/5008S Cordiax
  • Automated data logging and monitoring
  • Network connection
  • Start / Stop communication with HD-device
  • Low noise emissions
  • Ring main length up to 10 m

High flexibility – Optional porters for AquaC UNO H

Contact Us

Close

Request a sales meet, demo or brochure by using this contact form


The information you provide will only be used to answer your query. For more information on how we process your Personal Data please read our privacy policy

This contact form is not intended to submit an adverse event related to medicinal products. To report an adverse event, please contact us at corporate-drug-safety(at)freseniusmedicalcare.com.

Related content

No Results Found
PREVIOUS
    NEXT
    Media center
    See all stories
    No Results Found
    See all stories
    PREVIOUS
      NEXT
      Events
      See all events
      No Results Found
      See all events
      PREVIOUS
        NEXT
        Contact
        Country websites

        All contact information

        Social Media

        © Fresenius Medical Care AG 2026

        Privacy policy

        Cookie settings

        Imprint